UNiSEAL PU13
一、UNiSEAL PU13 符合ASTM C920-02 及 CNS 6985建築填縫用聚胺酯規定品質。
二、UNiSEAL PU13係雙劑合成型聚胺酯填縫料，能於一定之環境氣溫條件下混合硬化成體，形成一堅韌強固之彈性橡膠體。即使是在反覆位移作用下產生的壓縮及伸長量變化，也有優異的恢復性能；此外其更有適應多種氣候與氣溫型態的特有性質。
三、UNiSEAL PU13填縫劑有兩種使用途徑1.澆置施工2.注射槍施工；以適用於平坦地板或是垂直牆面的填縫，都能通過嚴格的規範或技術要求，是最普遍被使用的填縫劑。
四、UNiSEAL PU13填縫劑適用於土木工程的橋樑、面板、機場跑道和作業場房等處的伸縮縫，提供最理想的密封填縫施工品質；尤其是在密集人潮和交通車輛繁碌的地方，更有高效果的防止磨損、活化彈性的作用。 |
UNiSEAL PU13
1, UNiSEAL PU13 meet ASTM C920-02 and CNS 6985 provides quality of construction sealing with polyurethane.
Second, UNiSEAL PU13 series double agent synthetic polyurethane sealing material, can in certain conditions of environmental temperature mixing Hardened into the body, forming a tough elastic rubber body strong. Even under the effects of repeated displacement
Compression and elongation change, there are excellent recovery performance; In addition, their greater variety of climate and temperature adaptation
The unique nature of the pattern.
3, UNiSEAL PU13 sealant used in two ways 1. Poured Construction 2. Injection gun construction; to apply to flat Tank floor or vertical wall sealing, can pass a stringent standards or technical requirements, is the most commonly Use of sealant.
4, UNiSEAL PU13 sealant applied to civil engineering, bridges, panels, airport runways and operating rooms and other field Expansion joints, provide the best seal sealing construction quality; particularly in the dense crowd and traffic vehicles Fan busy place vehicles, more effective prevention of high wear, flexible activation function. |
